A Nissan Rogue in West Palm Beach, FL

Auto Keys

Nissan Key Replacement, Key Fob Programming & Smart Key Service

From DA34 transponder keys to Intelligent Key proximity fobs, we cut and program Nissan keys at your location across Palm Beach County.

Nissan keys moved from the DA34 and NI04T transponder keyways to the Intelligent Key proximity system used across most of today's lineup. The fob family changed roughly every generation (KBRASTU15, CWTWB1U751, KR55WK48903, then KR5TXN7), so the year and ignition type decide which key your Nissan needs.

Our mobile techs cut and program keys for the Nissan lineup most common in Palm Beach County, including the Altima, Rogue, and Pathfinder. We carry the blanks and programming tools in the van, confirm whether your Nissan is turn-key or push-to-start, and finish most jobs curbside in one visit.

A range of Nissan keys and fobs we cut and program in West Palm Beach, FL
Nissan keys and fobs we cut and program

Nissan key types by generation

Nissan keys changed significantly from one era to the next. The right blank, chip, and programming path depend on the year, trim, and ignition type, which is why we ask for the details before selecting a key.

2000 to 2006: DA34 transponder keys

Early Nissans used the DA34 keyway with transponder chips and remote fobs such as the KBRASTU15. The blade fits the door and ignition, but the engine starts only when the chip is matched to the immobilizer.

2007 to 2018: NI04T keyway and Intelligent Key launch

Nissan rolled out the NI04T keyway and introduced the Intelligent Key proximity system, moving through the CWTWB1U751 and KR55WK48903 fob families. Many of these models split between turn-key and push-to-start by trim.

2019 to present: latest Intelligent Key fobs

Modern push-to-start Nissans use the latest Intelligent Key proximity fobs (FCC KR5TXN7) with an emergency blade inside. Lost smart keys are programmed to the specific vehicle.

Nissan key data by model

Verified blank, chip, and FCC references are marked accordingly. Where a value depends on trim, button count, or production date, confirm it from the original key, a VIN lookup, or a supplier catalog before cutting or ordering.

Data is drawn from professional locksmith key references. It is a starting point for identification, not a guarantee for your specific vehicle.

Nissan Altima Key Replacement

The Altima is one of the most common cars we make keys for. It spans DA34 transponder keys, Intelligent Keys on many trims, and the latest proximity fobs depending on the year.

Year rangeKey typeIlco / keywayChip / systemFCC / OEMProgrammingEmergency / service keySource confidence
2000-2006Transponder blade keyDA34 keywayTransponderFCC KBRASTU15 where remote-equipped; confirm by VINOnboard procedure or OBDService keyConfirm with original fob
2007-2012Intelligent Key (proximity) or transponder by trimNI04T keyway / emergency bladeSmart key / transponderFCC CWTWB1U751Proximity or OBD programmingEmergency insertVerified from source data
2013-2018Intelligent Key (proximity)Emergency bladeSmart keyFCC KR55WK48903Proximity programmingEmergency insertVerified from source data
2019-2025Intelligent Key (proximity)Emergency bladeSmart keyFCC KR5TXN7Proximity programmingEmergency insertVerified from source data

Nissan Rogue Key Replacement

The Rogue is Nissan's compact SUV and uses Intelligent Key proximity fobs across most of its run, moving through several fob families by year.

Year rangeKey typeIlco / keywayChip / systemFCC / OEMProgrammingEmergency / service keySource confidence
2008-2012Intelligent Key (proximity) or transponder by trimNI04T keyway / emergency bladeSmart key / transponderFCC CWTWB1U751Proximity or OBD programmingEmergency insertVerified from source data
2013-2018Intelligent Key (proximity)Emergency bladeSmart keyFCC KR55WK48903Proximity programmingEmergency insertVerified from source data
2019-2025Intelligent Key (proximity)Emergency bladeSmart keyFCC KR5TXN7Proximity programmingEmergency insertVerified from source data

Nissan Pathfinder Key Replacement

The Pathfinder spans transponder keys on older models and Intelligent Key proximity fobs on newer push-to-start trims.

Year rangeKey typeIlco / keywayChip / systemFCC / OEMProgrammingEmergency / service keySource confidence
2007-2012Intelligent Key (proximity) or transponder by trimNI04T keyway / emergency bladeSmart key / transponderFCC CWTWB1U751Proximity or OBD programmingEmergency insertVerified from source data
2013-2018Intelligent Key (proximity)Emergency bladeSmart keyFCC KR55WK48903Proximity programmingEmergency insertVerified from source data
2019-2025Intelligent Key (proximity)Emergency bladeSmart keyFCC KR5TXN7Proximity programmingEmergency insertVerified from source data

Nissan Sentra Key Replacement

The Sentra ran as a transponder car for years before push-to-start Intelligent Keys arrived on higher trims, so the year and ignition type decide the key.

Year rangeKey typeIlco / keywayChip / systemFCC / OEMProgrammingEmergency / service keySource confidence
2007-2012Transponder blade keyNI04T keywayTransponder; confirm by VINConfirm FCC from the original key, VIN, or supplier catalogOnboard procedure or OBDService keyConfirm with original fob
2013-2019Transponder / remote head keyNI04T keywayTransponder; confirm by VINConfirm FCC from the original key, VIN, or supplier catalogOBD programmingService keyConfirm with original fob
2020-2025Intelligent Key (proximity) or transponder by trimEmergency blade; confirm keyway from originalSmart key / transponder; confirm by VINConfirm FCC from the original fob, VIN, or supplier catalogProximity or OBD programming by trimEmergency insert on proximity trimsVaries by trim
  • •Base Sentras can be turn-key transponder while upper trims are push-to-start; tell us which so we bring the right key.

Nissan Murano Key Replacement

The Murano has used the Intelligent Key proximity system across its modern run, sharing fob families with the rest of the Nissan lineup by era.

Year rangeKey typeIlco / keywayChip / systemFCC / OEMProgrammingEmergency / service keySource confidence
2009-2014Intelligent Key (proximity)Emergency bladeSmart key; confirm by VINConfirm FCC from the original fob, VIN, or supplier catalogProximity programmingEmergency insertConfirm with original fob
2015-2025Intelligent Key (proximity)Emergency bladeSmart key; confirm by VINConfirm FCC from the original fob, VIN, or supplier catalogProximity programmingEmergency insertConfirm with original fob

Nissan Frontier Key Replacement

The Frontier ran as a transponder truck for a long stretch before the redesign moved to push-to-start, so confirming the year and ignition type matters before we cut.

Year rangeKey typeIlco / keywayChip / systemFCC / OEMProgrammingEmergency / service keySource confidence
2005-2019Transponder / remote head keyDA34 / NI04T keyway; confirm from originalTransponder; confirm by VINConfirm FCC from the original key, VIN, or supplier catalogOnboard procedure or OBDService keyConfirm with original fob
2022-2025Intelligent Key (proximity)Emergency bladeSmart key; confirm by VINConfirm FCC from the original fob, VIN, or supplier catalogProximity programmingEmergency insertConfirm with original fob

Common Nissan key problems

  • •Worn DA34 and NI04T blades that turn the ignition but no longer reliably start the engine.
  • •Intelligent Keys that fail after water exposure following beach and boat days.
  • •Dead Intelligent Key coin batteries mistaken for a failed fob.
  • •All-keys-lost situations on push-to-start models that require programming to the vehicle.
  • •Buttons that stop working on remote and Intelligent Keys while the emergency blade still works.

Nissan programming notes

  • •Adding a spare while you still have a working key is faster and cheaper than an all-keys-lost job.
  • •Intelligent Keys are programmed to one specific Nissan and cannot be reused on another vehicle.
  • •We confirm the exact fob family from the VIN or original key before ordering, since the part number changed by generation.
  • •A no-start with a good battery is often the chip or immobilizer, not the engine, and the key may need reprogramming.

What to have ready before service

Sending these details when you call (561) 839-9919 lets us bring the right blank and programming tools on the first trip so your Nissan job is done in one visit.

1Year, make, model, and trim
2VIN (usually on the dash or door jamb)
3Turn-key ignition or push-to-start
4A photo of your existing key or fob
5Whether all keys are lost or you still have one
6The vehicle's current location

Real Nissan locksmith scenarios

These are the Nissan situations we actually get called for in Palm Beach County, with the technician's read on each one: what is happening, whether a mobile locksmith can solve it, and what the job typically involves. They are educational examples, not testimonials.

Electronic steering lock failure

The dash shows a steering lock or key system warning, the wheel stays locked, and the push-button start does nothing even with a good fob.

Likely causes

  • •A failed electronic steering column lock, a known Nissan weak point on several models.
  • •A fault between the BCM and the steering lock actuator.
  • •A low 12V battery confusing the system.

Programming

Required if the key or immobilizer is at fault

Ignition repair

Not required; a failed steering lock unit is a separate mechatronic repair

Key replacement

Only if the key has also failed

Complexity

Moderate to advanced

Common repair options

  • •Test the fob and immobilizer to rule the key in or out.
  • •Program a new Intelligent Key if the fob is the cause.
  • •Refer the steering lock actuator to a shop when the lock unit itself has failed.

Can a locksmith help? Yes. We confirm whether the fault is the key and immobilizer side or the steering lock unit itself, and program a key when the key is the problem.

Intelligent Key not detected

You press the start button and get a no key detected or key system error, even with the fob in your pocket.

Likely causes

  • •Dead or weak coin battery in the Intelligent Key.
  • •A failed or water-damaged fob.
  • •All fobs lost so none can be detected.

Programming

Required for a new fob

Ignition repair

Not required

Key replacement

If the fob has failed

Complexity

Routine to moderate

Common repair options

  • •Replace the coin battery and retest.
  • •Hold the fob to the start button to use the backup detection, then diagnose.
  • •Program a new Intelligent Key and cut the emergency blade.

Can a locksmith help? Yes. We test the fob, replace the battery, or program a new Intelligent Key if it has failed.

Key system malfunction message

A key system malfunction or push the ignition switch message keeps appearing, sometimes with intermittent starting.

Likely causes

  • •Weak fob battery dropping the signal.
  • •An aging fob with a fading transmitter.
  • •A low vehicle 12V battery.

Programming

Required for a new fob

Ignition repair

Not required

Key replacement

If the fob is failing

Complexity

Routine to moderate

Common repair options

  • •Replace the fob battery and recheck.
  • •Program a replacement Intelligent Key if signal stays weak.
  • •Confirm the vehicle battery is healthy.

Can a locksmith help? Yes. We check the fob signal and battery and program a fresh Intelligent Key if the old one is failing.

Lost all Nissan keys

Every key is gone and the car will not start or detect a fob at all.

Likely causes

  • •All keys misplaced, stolen, or lost on the water.
  • •Only one key ever came with a used Nissan and it was lost.

Programming

Required

Ignition repair

Not required

Key replacement

Required

Complexity

Moderate

Common repair options

  • •Program a new transponder key on turn-key models.
  • •Program a new Intelligent Key and cut the emergency blade on push-to-start models.

Can a locksmith help? Yes. We generate and program a new key or Intelligent Key directly to the vehicle on site.

Spare key while you still have one

You have one working key and want a backup before it gets lost or damaged.

Likely causes

  • •A single key on a used Nissan.
  • •A household that shares one key between drivers.

Programming

Required to pair the spare

Ignition repair

Not required

Key replacement

Adding a spare

Complexity

Routine

Common repair options

  • •Cut and program a spare transponder key.
  • •Program a spare Intelligent Key and cut its emergency blade.

Can a locksmith help? Yes. Adding a spare while you still have a working key is the fastest and cheapest key job we do.

Water-damaged Intelligent Key after a beach or boat day

The fob got wet at the beach or on the boat and now the buttons or proximity detection are unreliable.

Likely causes

  • •Salt water or moisture inside the fob corroding the board.
  • •A swollen or shorted coin battery.

Programming

Required for a new fob

Ignition repair

Not required

Key replacement

If the fob is corroded

Complexity

Routine to moderate

Common repair options

  • •Replace the battery and dry the fob to test function.
  • •Program a new Intelligent Key if the board is corroded.

Can a locksmith help? Yes. We test whether the fob can be revived and program a new Intelligent Key when water damage is permanent.

NATS theft light, key turns but won't start

On an older turn-key Nissan the engine cranks but never catches, and the security light blinks.

Likely causes

  • •The transponder is not being read by the NATS immobilizer.
  • •A failed chip or a key that was never fully programmed.
  • •A worn DA34 or NI04T blade not seating in the lock.

Programming

Usually required

Ignition repair

Only if the lock or reader is also faulty

Key replacement

Often

Complexity

Moderate

Common repair options

  • •Reprogram the existing key if the chip is intact.
  • •Cut and program a new transponder key if the chip has failed.

Can a locksmith help? Yes. We confirm whether the chip is being read and reprogram or replace the key so NATS recognizes it.

Worn transponder blade with intermittent starting

The key has to be jiggled or held at an angle, and starting is hit or miss.

Likely causes

  • •A worn DA34 or NI04T blade after years of use.
  • •A worn ignition lock wafer set.

Programming

Required if a new transponder key is cut

Ignition repair

Only if the cylinder is worn

Key replacement

Often, to restore a crisp cut

Complexity

Moderate

Common repair options

  • •Cut a new key to the original code and program it.
  • •Rebuild or replace the ignition cylinder if it is worn.

Can a locksmith help? Yes. We cut a fresh key to factory spec from the code so the blade engages cleanly again.

Remote buttons dead but the key still starts

Lock and unlock from the fob stopped working, yet the car still starts normally.

Likely causes

  • •A failed button membrane or transmitter on a remote head or Intelligent Key.
  • •A weak coin battery.

Programming

Required for a new remote

Ignition repair

Not required

Key replacement

If the remote has failed

Complexity

Routine

Common repair options

  • •Replace the fob battery and retest the buttons.
  • •Program a new remote head key or Intelligent Key.

Can a locksmith help? Yes. We replace and program a new remote or Intelligent Key so the buttons work again.

Broken Intelligent Key shell

The car still detects the fob, but the shell has cracked or the emergency blade has come loose.

Likely causes

  • •Years of daily handling and drops.
  • •A failed shell hinge or split casing.

Programming

Only if a new fob is supplied

Ignition repair

Not required

Key replacement

Shell swap or full fob

Complexity

Routine

Common repair options

  • •Rehouse the existing electronics and emergency blade in a new shell.
  • •Program a new Intelligent Key if the board is also damaged.

Can a locksmith help? Yes. We can move the working electronics into a new shell or supply and program a fresh fob.

Push-button start does nothing intermittently

The start button sometimes does nothing, then works after a few tries, with no clear pattern.

Likely causes

  • •A weak fob battery dropping in and out.
  • •A low vehicle 12V battery.
  • •An aging fob with a fading signal.

Programming

Required for a new fob

Ignition repair

Not required

Key replacement

If the fob is failing

Complexity

Routine to moderate

Common repair options

  • •Replace the fob battery and confirm the vehicle battery is healthy.
  • •Program a new Intelligent Key if the signal stays unreliable.

Can a locksmith help? Yes. We test the fob and program a fresh Intelligent Key when the old one is the weak link.

Used Nissan that came with one key

You bought a used Altima, Rogue, or Pathfinder and it only came with a single key or fob.

Likely causes

  • •The second key was never handed over at sale.
  • •The remaining key is old and you want a reliable backup.

Programming

Required to pair the spare

Ignition repair

Not required

Key replacement

Adding a spare

Complexity

Routine

Common repair options

  • •Cut and program a spare key or Intelligent Key.
  • •Confirm the correct fob family by VIN before ordering.

Can a locksmith help? Yes. We confirm the exact fob by VIN and add a spare while the existing key still works.

Nissan Key & Fob FAQs

Can you replace a Nissan key if I lost all of them?

Yes. We program a new key or Intelligent Key to your vehicle on site. All-keys-lost jobs on push-to-start models take a little longer because the key is programmed directly to the car.

Do you program Nissan Intelligent Keys (push-to-start)?

Yes. We supply and program proximity Intelligent Keys such as the KR55WK48903 and KR5TXN7 and cut the emergency blade inside.

My Nissan key turns but won't start. What's wrong?

The transponder in the key has to match the immobilizer. If the blade is fine but the engine won't start, the chip may have failed and the key needs reprogramming or replacement.

Is my Altima turn-key or push-to-start?

Both exist across the years. If you insert and twist a key it is turn-key; if you press a button it is an Intelligent Key. Tell us which so we bring the correct key.

How much is a replacement Nissan key?

It depends on whether it is a transponder key or an Intelligent Key, plus the year. We quote an up-front price before we head out.

Can you cut a spare Nissan key from my working one?

Yes. A spare made from a working key is the cheapest insurance against a future lockout, and we cut and program it on the spot.

Do you come to my home or workplace?

Yes. We are fully mobile and service Nissans wherever they are parked across Palm Beach County.

Why is my Nissan Intelligent Key not detected?

It is often a dead coin battery rather than a failed fob. We can test it, replace the battery, or program a new Intelligent Key if needed.

What do you need to make a Nissan key?

The year, model, VIN, whether it is turn-key or push-to-start, and proof of ownership. A photo of your current key helps us match it.

Do you service Nissan SUVs as well as cars?

Yes. We handle the Rogue, Pathfinder, and the rest of the Nissan lineup, not just the sedans.

Locked Out? We're on the Way.

Don't wait around. Our mobile technicians are stationed throughout West Palm Beach ready to dispatch to your location immediately.